Focusing on Measuring, Monitoring and Control of Current, Voltage

Power and Energy

Single Phase AC Voltage Transducer Model:GS-AVIB1-xxSC

Single Phase AC Voltage Transducer Model:GS-AVIB1-xxSC

Input Range
AC A2V--1000V
Power Supply
12V dc15V dc24V dc
0-5V dc0-10V dc0-20mA dc 4-20mA dc
35mm DIN Rail or Screw
Length:116mm; Width:25mm; Height:87mm;
Single Phase AC Voltage Transducer    Model No.:NB-AV1B1-xxSC

AV1B1 series product is a single Phase AC voltage transducer. It detects  AC volltage in a wire, and generates a signal proportional to that voltage. The generated signal could be analog voltage (0-5V or 0-10V) or current (0-20mA or 4-20mA). The generated signal can be then used to display the measured voltage in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.

* Basic Accuracy:Class 0.5
* Power Supply:+12V、+15V、+24V.  (Optional)
* Input Voltage Range:AC 20V~1000V
*Input Frequency:50Hz
*Output Signal:0-5V、0-10V、0-20mA、4-20mA, (Optional)
*Operating Temperature:-10℃~+60℃
*Load of Output:Voltage Output ≥2KΩ;Current Output ≤250Ω
*Static Power:≤0.3W
*Rated Power:≤0.7W
*Load of Insulation Voltage:DC 2500V
*Response Time:≤300ms
*Thermal Drift:≤300PPm/℃
*Lightening Surge:Power end 2000V,Input end 2000V,Output end 500V
*Case Style:M
*Case Material:ABS(flame retardant)
*Installation:35mm DIN Rail.

Part Number Guides:

Inside the model NB-AV1B1-xxSC, "xx" means "output" and "power supply". There are different output values and power supplies for options. For examples:
NB-AV1B1-A4SC  Single phase ac voltage transducer,2 isolating,sine wave,output 0-5V,power supply 24V,case syle S,Accuracy :Class 0.5
NB-AV1B1-C2SC  Single phase ac voltage transducer.2isolating,sine wave,output 0-20mA,power supply 12V,case syle S,accuracy:Class 0.5
NB-AV1B1-D3SC  Single phase ac voltage transducer,2 isolating,sine wave,output 4--20mA,power supply 15V,case syle S,accuracy:Class 0.5

Wiring diagrame:
Wiring for power supply of 12V D ,15V DC,or 24V DC:

Terminals 1 and 3 are for input;Terminals 11 and 12 are for output; Terminals 10 and 11 are for power supply;Terminasl 11 is GND for both output and power supply.Terminals 2, 4, 5, 6, 7, 8 and 9 are NC (No Connection); 

Online message